Why are some substances sticky or slippery?

Cleaning sticky rubberized handles and surfaces | manual

Many household and consumer electronics items have rubber surfaces or handles that are touched frequently. Over time, you'll have to put up with sticky rubberized handles that are extremely uncomfortable against your skin. Fortunately, the rubber is easy to clean if you know how. If you want to clean the sticky surfaces, instructions and cleaning supplies are necessary.

Sticky rubberized handles and clean surfaces. Many people struggle with this problem, as the material no longer has the same properties after a long period of use or if it is dirty, which means that it begins to stick. This problem can have many causes, as different ingredients have been used depending on the type of rubber, which have different effects on external influences.

Because of this, it is important to know which ones root cause exists in order to combat this accordingly. Based on the cause, an appropriate cleaning method is used that prevents the rubber from sticking and can be used again. You can find out how to do this in this article.

Content

Sticky rubberized handles

causes

If you need to clean sticky rubberized handles and surfaces, the first thing to do is to investigate the possible cause beforehand. Sticky rubber can occur overnight or over a longer period of time, which also makes it easier to identify the cause. If you're wondering what created the sticky rubber grips and surfaces, the following points will help you.

cleaning supplies

Rubber does not tolerate harsh detergents. Many people use cleaning agents that contain alcohol or are extremely acidic. These can have an extremely aggressive effect on the structure of the rubber and almost dissolve it, which is especially true for Synthetic rubber the case is. Natural rubber is less susceptible, but shouldn't be exposed to the harsh cleaners either. The use of cleaning agents that are not recommended for this can be recognized by streaks on the rubber or clearly visible damage.

Age at synthetic rubber

Synthetic rubber becomes stickier and loses its substance over the years of use. The reason is a loss of plasticizers, which ensure that the rubber dissolves more and more. As a result, it becomes sticky thing by various Environmental influences can still be increased. Natural rubber does not have this problem.

Environmental influences

Numerous environmental influences can adversely affect the company structure of the rubber and lead to sticky spots or the entire surface. For example, if you have a bicycle with rubber grips on the handlebars, strong sunlight can cause them to stick because the material is attacked.

Self Temperature differences, high humidity or chemicals from other objects can adversely affect the fabric. One example is formaldehyde, which is often given off by furniture and passed on to the rubber, which can cause problems. Therefore, make sure that your rubber grips and surfaces are not placed too inconveniently.

fats and oils

Just as cleaning agents that are too harsh can attack the material, this is the case with oils and fats, which could come from the palm of your hand, for example. For example, if you use a bottle every day that is over Rubber parts the material can be attacked. The oil or fat pulls deep into the gum and dissolves it from the inside, which at the same time makes it sticky.

Compare each cause to see which one it is. If the problem came on quickly, consider the most recently used cleaning supplies check for their ingredients. Sticky, rubberized handles and surfaces can also appear quickly if, for example, cooking oil runs over them and you do not immediately remove it with water. Regardless of the cause, you will find suitable remedies and below Methodsso that the rubber is no longer sticky.

Tip: If the rubberized handles and surfaces become sticky due to causes such as fruit juices or other substances, they can easily be removed with water. If the rubber is not already permanently damaged, gentle cleaners are ideal for it, especially when it comes to substances containing sugar.

Clean sticky rubberized handles

7 suitable cleaning agents

If you want to clean sticky rubberized handles and surfaces, you need suitable ones cleaning supplies use so as not to damage the material. It is important to choose the means according to their effect and the type of rubber.

  • Natural rubber
  • Synthetic rubber

There Natural and synthetic rubber have different properties in terms of their structure, you must not use the same cleaning agents in all cases. There the two Rubber types Can be used by humans in much the same way, many assume that the same detergents can be used.

Natural rubber is much more sensitive with regard to cleaning, which of course limits the possible means. There are therefore a few home remedies for cleaning, as well as cleaners that you can purchase in stores. Below you will find an overview of suitable cleaning agents that you can use for natural and synthetic rubber.

In addition to these, you will also need the following utensils:

  • Microfiber cloths
  • Sponges without a scouring side
  • toothbrush
  • Towels to dry
  • Cotton pads
  • Plastic bowl or bucket

These facilitate the application of the following medium. Microfiber cloths in particular are important because they do not damage the rubber, absorb dust and dirt more easily and even work against fats and oils, which are always problematic with this material.

Tip: Avoid using cleaning agents such as nail polish remover that contain acetone. Acetone makes the rubber clean at first glance, but the structure of the material suffers, becomes sticky again and dissolves more and more after each use, which is not really desired.

Instructions | vinegar

Yes, you can use acetic acid to clean sticky rubbers, even if it's natural rubber. Soft rubber and silicone, on the other hand, must not be cleaned with vinegar. Use only for this Vinegar essence with a maximum of 25 percent acetic acid.

  • Mix 3 parts water and 1 part vinegar essence
  • Wet the sponge or cloth
  • apply on rubber
  • rub in carefully
  • rinse off
  • dry

Instructions | Washing-up liquid

If the rubber is only weakly bonded, the use of detergent is sufficient. Prepare one Soapy water from one liter of water and ten milliliters of washing-up liquid. Put the handles or objects in the lye. Clean them with the sponge or a cloth and then rinse the rubber off with clear water. On the other hand, wipe rubberized surfaces with the lye. Don't forget to dry. In most cases, detergent can be sufficient.

Tip: In the same way, you can use a gentle laundry detergent to soak sticky rubberized handles. After a while, remove them from the detergent solution, rinse and dry them thoroughly so that you can use them again.

Instructions | toothpaste

Ordinary toothpaste is a good tool for cleaning sticky rubberized handles and surfaces. Toothpaste is not too aggressive for rubber and can be used with little effort. Toothpaste is especially good for Rubber seals suitable. Put the toothpaste on a toothbrush or cloth and use it to brush the object. Rinse and dry.

Instructions | Baking soda

Soda is a classic home remedy that works even with sticky Synthetic rubber helps. To do this, mix a packet of baking soda with water. The result must be a homogeneous mass that can be easily applied with a toothbrush or a sponge. The baking soda is used in the same way as the toothpaste.

Instructions | Nail cleaner

Nail cleaners have established themselves as excellent cleaners for rubber grips and surfaces. These cleaners are not used to remove nail polish, but to clean natural and artificial nails and equipment such as nail scissors. For this reason, they refrain from aggressive Componentsthat could attack the rubber. Nail cleaners are offered cheaply for a price of seven to ten euros per liter and are used in the following way.

  • Spray rubber
  • Wipe the sprayed surface with a cotton pad
  • optionally rinse with fresh water
  • dry

Then the rubber should be clean again and no longer stick. You shouldn't use nail cleaners Natural rubber apply.

Tip: In addition to a nail cleaner, you can also use adhesive removers that are available in hardware stores, the Internet or in specialist shops. Only make sure that the selected product does not attack surfaces and objects made of rubber, as the CLEANEXTREME allows.

Instructions | Baby powder

Classic baby powder can be used to clean natural and synthetic rubber. Because it's a gentle Cleaning effect achieved, it is ideal for cleaning sticky rubberized handles and surfaces that are soiled by oils and greases. Baby powder is also very cheap to buy and can be used in the following ways.

  • Put baby powder on a cloth
  • Rub on surface or place
  • let absorb
  • wipe off after a while
  • no need to rinse

The secret behind baby powder is what it contains talc. This cleans the rubber without attacking it. Since it is a very gentle cleaner, you will have to repeat the procedure several times for particularly sticky surfaces and handles.

Instructions | Yoga mat spray

Yoga has been all the rage for several years and more and more mats are being offered for sports. Many mats are made from natural rubber and are cleaned with special sprays that are gentle on the material. You can take advantage of this. Be on the internet and yoga shops Mat cleaner that allow you to easily clean sticky rubberized handles and surfaces. These are offered for around nine to eleven euros for half a liter in a spray bottle and are used in the following ways.

  • Spray rubber
  • leave on for a few minutes
  • Moisten the sponge
  • Wipe off the rubber
  • Rinse under running water
  • dry well

There is yoga mat spray that contains essential oils, which, depending on the intensity, can cause the material to decompose more quickly over time. Instead, rely on sprays without fragrancesto improve the cleaning effect.