Which welding rod should I use?

06749 Bitterfeld Hallesche Strasse 18 Tel .: Fax: Table of contents

Transcript

1 How to find us!

2 06749 Bitterfeld Hallesche Strasse 18 Tel .: Fax: Table of contents 1 Construction site facilities 6 Work safety equipment 1.1 Containers, rapid construction halls 6.1 Height safety devices 1.2 Vehicles, trailers 6.2 Work safety shoes and boots 1.3 Site power distributors, transformers 6.3 Clothing 1.4 Power generators 6.4 Gloves 1.5 Compressors 6.5 Other 1.6 Other aids 2 Tools and aids 7 Consumables 2.1 Drilling, countersinking, rubbing 7.1 Welding wire, electrodes 2.2 Sawing, milling, shearing 7.2 Grinding tools, saw blades 2.3 Grinding, polishing 7.3 Drills, chisels 2.4 Turning, chamfering 2.5 Bending 2.6 Screws, welding, annealing, forming 2.8 Pressing, pumping 2.9 Lifting equipment, accessories Tool boxes, accessories 2.11 Other tools 10 Additional services 3 Electrical equipment 10.1 Transport and logistics 3.1 Small distributors, extensions, adapters 10.2 Testing of small lifting equipment 3.2 Lighting 10.3 Testing of electrical devices 3.3 Heating devices 10.4 Calibration of measuring devices 4 Mess and test equipment Length measurement technology 4.2 Temperature measurement technology 4.3 Pressure measurement technology 12 General Terms and Conditions 4.4 Gas measurement technology from BIS IKR GmbH for 4.5 other measurement and testing technology Rental of devices and equipment 5 Communication 5.1 Office communication 5.2 Construction site communication

3 06749 Bitterfeld Hallesche Strasse 18 Tel .: Fax: Foreword The device service department at BIS IKR GmbH Industrie- Kraftwerks- Rohrleitungsbau, a Bilfinger Berger Industrial Services AG company, is a proven partner and service provider in the rental of devices and equipment for the Pipeline construction including the provision of the necessary consumables and consumables. With our more than 4500 different catalog items, we meet the requirements of chemical and industrial pipeline construction as well as the specific needs of power plant pipeline construction. We serve a broad regional customer base in the central German industrial area, without neglecting the supraregional customers in Germany and the neighboring countries. Well-trained and motivated staff is available to advise you on your requirements and questions. Our equipment park is state-of-the-art and is constantly being supplemented by investments. The specified maintenance and repair cycles ensure that the assembly devices are delivered in a technically good condition that is suitable for the purpose. With our logistics partners, we are able to deliver orders up to 2 p.m. during the next day to the location specified by you in Germany. General The catalog contains the assembly devices, consumables and consumables available for your needs. If you cannot find the product you have in mind in the catalog, please contact us so that we can carry out the procurement. We are constantly trying to meet your needs. Achieving customer satisfaction is the aim of all employees in the device service in Bitterfeld. Terms of delivery and payment Our rental prices, which we will be happy to announce to you on request, apply every working day from Monday to Friday. Weekly and monthly prices result from the multiplication by the factor 5 or 21. For short-term rentals of up to 5 days, additional fees apply. The rent is calculated once a month and is payable within 14 days with a 2% discount or after 30 days without any deduction. In the case of longer-term rentals, we grant discounts, taking into account the scope of the rental. In addition, our "General Terms and Conditions of BIS IKR GmbH for the rental of devices and equipment" (GTC) apply. User information You can find the subject you are looking for using the subject index or the table of contents. A 4-digit order number is entered in the subject index. the 1st digit of which indicates the register and the other digits the section and the page number. The table of contents lists the numbers for the register and the sections it contains. Each item of equipment listed contains an article number, which you should include in order to clearly identify the item to be ordered. The catalog is used to present our product range, but due to lack of space it cannot depict everything graphically. The photos listed are therefore to be regarded as type representatives in individual cases.

4 06749 Bitterfeld Hallesche Strasse 18 Tel .: Fax: Contact person in Equipment Service Rental / Sales / Service Mr Engler Tel.-No .: (03493) Head of Equipment Service, Fax No .: (03493) Acquisition, Sales Mobile: (0173) Ms. Jacobi Tel.-No .: (03493) Deputy Head of Equipment Service Fax-No .: (03493) Mr. Berndt Tel.-No .: (03493) Responsible Fax-No .: (03493) Repair, Service - Electronics Mr. Pöhlig Tel. No .: (03493) Responsible Fax No .: (03493) Repair, Service - Mechanics Mr. Hebold Tel.-No .: (03493) Responsible Fax No .: (03493) Storage area Basic material Ms. Jacobi Tel.-No. : (03493) Disposition, verification Ms. Weber Tel.-No .: (03493) Invoicing, Invoice Verification Ms. Hertel Tel.-No .: (03493) Fax-No .: (03493) Ms. Häder Tel.-No .: (03493 ) Purchasing Fax-No .: (03493) Mr. Lotze Tel.-No .: (03493) Responsible storage areas Mr. Sperber Tel.-No .: (03493) Lifting equipment (round slings) Fax-No .: (03493) Safety harnesses, consumables, pressure switch reiber, measuring technology electrical machine tools Autogenous technology hoses, cables Mr. Lotze Tel.-No .: (03493) Welding consumables Mr. Blechschmidt Tel.-No .: (03493) Fax-No .: (03493) Mr. Friedrich / Tel.-No. : (03493) chamfering machines, quick release clamps Mr. Große Tel.-No .: (03493) centering devices, pumps, trestles Fax-No .: (03493) welding machines, lifting equipment Mr. Blechschmidt / Tel.-No .: (03493) logistics, transport Ms. Hertel Tel.-No .: (03493) Mr. Sperber Tel.-No .: (03493) Occupational safety Fax-No .: (03493) Office supplies on-call service 24 h Mobile: (0172)

5 06749 Bitterfeld Hallesche Strasse 18 Tel .: Fax .: Assembly device request Request Repair Exchange Return Damage report Loss report Company: Address: Contact person: Telephone / Fax: Tel .: Fax: Construction site: Order number: Part number / Inv.-No. Number delivered Designation and description Start of rental: Estimated end of rental: Pickup: Collection by forwarding agent: Dispatch by lessor: (Name) The delivered goods remain the property of BIS IKR GmbH Industrie- Kraftwerks- Rohrleitungsbau until they have been paid for in full. The tenant is aware of the general terms and conditions of BIS IKR GmbH for the rental of devices and equipment, which apply without restriction to the contractual relationship. Place, date (please tick where applicable) Signature

6 Keyword index All-purpose vacuum cleaner Bosch beveling and pipe cutting device BG beveling and pipe cutting device BG beveling and pipe cutting device RAD mm beveling and pipe cutting device RAD mm beveling and pipe cutting device RAD mm beveling and pipe cutting device WACHS SF beveling and pipe cutting device WACHS SF beveling device MF 3 - compressed air or electrical beveling device MF 3i - compressed air or electrical beveling device MF 3i-w - compressed air or electrical beveling device MF 5i - compressed air beveling device MF 6i - compressed air beveling device MF 6i-50 - compressed air trailer - for construction machinery 1.5 t trailer - for construction machinery 1 , 7 t trailer - for construction machinery 5.6 t trailer - car trailer, open box trailer - platform trailer 17 t trailer - pipe trailer 7 m trailer - pipe trailer company socket wrench electric rotating device 1.0 t electric rotating device 3.0 t electric rotating device 5, 0 t Pressure and temperature recorder Pressure recorder type Electrode Electrode Electrode Electrode Electrode Electrode holder Krell PK Electrode cabinet set 50 / Electrode cabinet WED 35 / Electrode dryer vehicles - Accessories Fax device Panasonic UF precision pressure gauge Flange spreader Bestma Flange spreader Hand pump hydraulic 700 bar Flange spreader hydraulic Flange spreader Smile Hydr Flange spreader Spreader Claw WR-5 and WR Page 1 of 4

7

8- and moisture meter Novasima MSI temperature recorder Theodolite Pentax ETH 20 F thermometer - hand transformer / 42V 1200 W transformer - 230V / 42V 4000 W transformer - 400V 32A / 42V 6000 W Hupperich carrier clamp Transporter VW - closed box Transporter VW bus Caravelle Transporter VW - Platform transporter VW platform Doka cutting and grinding disks Separating transformer / 230V 2500 W Unimog with charger Extension cable distributor - Connection cabinet distributor - Site power distributor distributor - Container distributor 10x Page 3 of 4

9 Keyword register Distributor - Elspro 32A distributor - Elspro 63A distributor - GIFAS distributor - Hanover distributor - Main distributor - HV 250 B distributor - Small distributor K distributor -Safety distributor 63 / 32A and 32A / maintenance unit for DL ​​devices Cotton jacket and cord vest Workbench winch - Electric cable winch 2- 5 to winch - electric winch 500 kg, Yale RPE winch - motorized cable, minifor winch - type Tirak TK angle drill Bosch angle drill fine angle grinder 125 mm angle grinder mm winter and rubber boots tungsten electrodes - soldering rod Page 4 of 4

10 container container - office container type 700 B set up for 2 workplaces with: electrical installation, electric wall heater, vestibule with inner door, double-glazed windows, 2 small desks 2 chairs 1 filing cabinet 2 roll cabinets Dimensions length: width: height: 6040mm 2450mm 2650mm container - accommodation container type 700 T set up for 8 people with: electrical installation, electric wall heater, vestibule with inner door, double glazed windows, 8 chairs 2 tables 8 sheet steel double lockers Dimensions length: width: height: 6040mm 2450mm 2650mm as of 08/2007

11 container container - sanitary container S 25 D set up for 25 people in accordance with ASTV with: 2 shower cubicles complete 2 washing troughs with 5 washing places 2 toilet cabins with flush toilets 1 urinal trough 200l electric water heater and electric wall heater Dimensions length: width: height: 6040mm 2450mm 2650mm container - Empty container 20 feet External dimensions: mm x mm x mm Internal dimensions: mm x mm x mm kg Payload: kg As of 08/2007

12 quick assembly halls - assembly halls spans: 7.80 m, 11.0 m, 12.0 m, 13.0 m, 15.0 m lengths: any in a grid of 2.44 m side heights: 2.60 m, 3, 60 m, 4.50 m other heights on request!

13 vehicles - cars cars VW- Polo SDI small cars with diesel engine power: 44 kw / diesel seats: 5 empty weight: kg payload: 413 kg permissible total weight: kg dimensions L: mm W: mm H: mm car VW - Golf Variant TDI power: 66 kw / Diesel seats: 5 Empty weight: kg Payload: 478 kg Permitted total weight: kg Dimensions L: mm W: mm H: mm Passenger car VW Passat Kombi TDI power: 66 kw / Diesel seats: 5 Empty weight: kg Payload: 523 kg Permissible total weight: kg Dimensions L: mm W: mm H: mm

14 vehicles - car transporter VW bus Caravelle small bus diesel engine, in various designs and equipment. Please ask for details! Power: up to 75 kw Seats: 9 Empty weight: up to kg Payload: up to 903 kg permissible total weight: up to kg Dimensions L: mm W: mm H: mm Transporter VW flatbed small truck diesel engine, in various designs and equipment. Please ask for details! Power: kW Seats: 2-3 Empty weight: up to 980 kg Payload: up to 979 kg permissible total weight: up to kg Dimensions L: up to mm W: mm H: up to mm As of 08/2007

15 Vehicles - Transporter Transporter VW platform Doka small truck diesel engine, in various designs and equipment. Please ask for details! Power: kw Seats: 5 Empty weight: up to kg Payload: up to 909 kg permissible total weight: up to kg Dimensions L: up to mm W: mm H: up to mm Transporter VW closed box Small truck diesel engine, in various designs and equipment , e.g. as a workshop trolley. Please ask for details! Power: kw Seats: 2-3 Empty weight: up to kg Payload: up to 995 kg permissible total weight: up to kg Dimensions L: up to mm W: mm H: mm As of 08/2007

16 Vehicles - Truck Truck Multicar M 26 Tipper Small truck with all-wheel drive, trailer towing device and municipal hydraulics, in various designs and equipment. Please ask for details! Power: up to 62 kw Seats: 2 Empty weight: kg Payload: kg Permissible total weight: kg trailer load, used kg trailer load, unused 750 kg Dimensions L: mm W: mm H: mm As of 08/2007

17 Vehicles - Unimog tractors with charger 0001 Tractors with hydraulic loading crane for assembly work and trailer coupling. The crane can be telescoped under load. Partially manual lifting arm extension possible. Load capacity and outreach, depending on the equipment, up to 2.5 tons and up to 16.0 m. Type kw loading crane Weight trailer load U kw HIAB kg kg U kw HIAB kg kg U kw HIAB kg kg U kw HIAB kg kg HIAB kg kg PK kg kg U kw HIAB kg kg Loading crane parameters: Type HIAB071 3.87t / 1.80m 2.00t / 3.60m 1.00t / 6.90m 0.54t / 9.0m HIAB100 HIAB102 HIAB125 2.10t / 4.30m 1.47t / 6.10m 0.92t / 9.40m 0.60t / 11.3m 2 .30t / 4.40m 1.24t / 8.20m 0.91t / 10.20m 0.72t / 12.3m 2.55t / 4.50m 1.32t / 8.10m 1.05t / 9.90m 0, 83t / 12.0m PK8000 3.83t / 2.00m 2.05t / 3.70m 1.35t / 5.50m 1.01t / 7.2m

18 vehicles - trailers trailers - for construction machinery 5.6 t single-axle trailer (tandem axle) with towing eye. The rear drop side can be used as an access ramp. Empty weight: kg Payload: kg Permissible total weight: kg Dimensions L: mm W: mm H: mm Inner box dimensions: L: mm W: mm Trailer - for construction machines 1.7 t single-axle trailer with overrun towing device and ball coupling. The rear drop side can be used as an access ramp. Empty weight: 740 kg Payload: kg Permissible total weight: kg Dimensions L: mm W: mm H: mm Inner box dimensions: L: mm W: mm Trailer - pipe trailer 7 m single-axle trailer with overrun towing device and ball coupling, foldable stanchions. In different lengths! Empty weight: Payload: total weight: 740 kg kg kg Dimensions L: mm W: mm H: mm

19 vehicles - trailers trailers - for construction machinery 1.5 t single-axle trailer with overrun towing device and ball coupling. The rear drop side can be used as an access ramp. Empty weight: 520 kg Payload: kg Permissible total weight: kg Dimensions L: mm W: mm H: 940 mm Inner box dimensions: L: mm W: mm Trailer - car trailer, open box single-axle trailer with overrun towing device and ball coupling. The rear drop side can be opened. Empty weight: 301 kg Payload: 999 kg Permissible total weight: kg Dimensions L: mm W: mm H: 901 mm Inner box dimensions: L: mm W: mm Trailer - pipe trailer from Heinze single-axle trailer with overrun drawbar and ball coupling. Empty weight: Payload: total weight: 225 kg 725 kg 950 kg Dimensions L: mm W: mm H: mm Internal frame dimensions: L: mm H: 300 mm

20 vehicles - trailers trailers - platform trailers 17 tons In various designs and equipment, suitable for transporting containers, optionally with stanchions. Empty weight: up to kg Payload: up to kg permissible total weight: up to kg Dimensions L: up to mm W: mm H: up to mm Platform L: mm H: up to mm Vehicles - accessories 0002 Description of tachograph discs Warning light with battery Warning vest Warning triangle Sani-box Fire extinguisher - Car wheel cross, different sizes lashing strap, different sizes as of 08/2007

21 Distributor Distributor - connection cabinet Available in various performance sizes, some with transformer meters. Please ask for details! Connected load: from 173 kw A to 250 kw A Dimensions L: up to mm W: up to 600 mm H: up to mm up to 150 kg as of 08/2007

22 Manifold Manifold - Main Distribution - HV 250 B In various output sizes, please inquire for details! Connected load: from 150 kw A to 390 kw A output: 4x 100 A / 400 V 2x 250 A / 400 V 1x 400 A / 400 V other equipment, on request! Dimensions L: up to mm W: up to 600 mm H: up to mm up to 215 kg Distributor - site power distributor Available in various performance sizes and equipment. Please ask for details! With and without a counter. Connected load: up to 150 kw Output: 2x CEE 63 A / 400 V 2x CEE 32 A / 400 V 2x CEE 16 A / 400 V 3x Schuko / 230 V other equipment, on request! Dimensions L: up to mm W: up to 600 mm H: up to mm up to 115 kg as of 08/2007

23 Distributor Distributor - Container distributor 10x distributors for connecting containers to the power grid. Connected load: 125 A Output: 10 x 32 A Dimensions L: mm W: 520 mm H: mm 100 kg

24 Power generator Bosch power generator Portable power generator for mobile use. In various designs and services. Please ask for details! Output power: up to VA 3 ~ up to VA 1 ~ Nominal current: up to 11.8 A 3 ~ / 23.9 A 1 ~ Dimensions L: up to 800 mm W: up to 860 mm H: up to 620 mm Equipment: up to 123 kg 1x CEE 16 A / 400 V to 2x Schuko / 230 V generator SDMO STDE "Alize" generator with ISO monitoring, noise level 92 LWA. Transport on loading platform or trailer. Nominal output: Output: Dimensions: Length: Width: Height: Equipment: 11.5 kva 9.2 kva mm 760 mm mm 534 kg 1x CEE 16 A / 400 V 1x Euro / 230 V 1x Schuko / 230 V power generator SDMO TM power generator with ISO monitoring, noise level 87 LWA. Transport on loading platform or trailer. Nominal output: 16.0 kva Output: 12.8 kva Dimensions: Length: mm Width: mm Height: mm 910 kg Equipment: 1x CEE 16 A / 400 V 1x Schuko / 230 V

25 Power generator Power generator SDMO type NS single-axle trailer, towing device optionally with ball coupling or towing eye.Nominal power: 35 kva Output: 28 kva Dimensions: Length: mm Width: mm Height: mm kg Equipment: 1x CEE 16 A / 400 V 1x CEE 32 A / 400 V 1x CEE 63 A / 400 V 2x Schuko / 230 V power generator SDMO Type NS single-axle trailer, towing device optionally with ball coupling or towing eye. Nominal power: 40 kva Output: 32 kva Dimensions: Length: mm Width: mm Height: mm kg Equipment: 1x CEE 16 A / 400 V 1x CEE 32 A / 400 V 1x CEE 63 A / 400 V 2x Schuko / 230 V power generator SDMO Type NS single-axle trailer (tandem axle), towing device optionally with ball coupling or towing eye. Nominal output: 80 kva Output: 64 kva Dimensions: Length: mm Width: mm Height: mm kg Equipment: 1x CEE 32 A / 400 V 1x CEE 63 A / 400 V 1x CEE 125 A / 400 V 2x Schuko / 230 V

26 compressors small compressor Economy 4/90 Kaeser voltage: 230 V / 400 V volume flow at 7 bar 215 l / min pressure: 10 bar dimensions length: mm width: 540 mm 1 DL - connection compressor mobile SC 20 DS volume flow: pressure range: dimensions length : Width: Height: Total weight: 2.0 m³ / min 5-8 bar mm mm mm 600 kg 2 DL - connections Compressor mobile SC 30 DS Volume flow: Pressure range: Dimensions Length: Width: Height: Total weight: 3.0 m³ / min 5-8 bar mm mm mm 850 kg 2 DL connections

27 compressors Compressor mobile SC 40 DS Volume flow: Pressure range: Dimensions Length: Width: Height: Total weight: 3.8 m³ / min 5-8 bar mm mm mm 850 kg 2 DL - Compressor connections - high pressure K High pressure compressor K250-2 H35 with 10 Meter high pressure hose. Voltage: 400 V / 16 A Power: 3 kw Pressure vessel: 250 l Boiler pressure max .: 35 bar 1 DL - connection as of 08/2007

28 Other aids Electric rotating device 1.0 t Electric rotating device for pipes Load capacity: up to 1 t Dimensions: DN Electric rotating device 3.0 t Electric rotating device for pipes Loading capacity: up to 3.0 t Dimensions: DN Electric rotating device 5.0 t Electric rotating device for Pipes load capacity: up to 5 t Dimensions: DN

29 Other aids Assembly stand - flat Lightweight assembly stand, also with wooden support. Height: 800 mm Width: mm Support: 110 mm Roller bracket - hydraulic Roller bracket, hydraulically adjustable, up to DN 600. Roller bracket - DN 800 red Flat roller bracket for pipe support. Roller bracket flat design DN Flat roller bracket for pipe support up to DN 250.

30 other aids Assembly stand - adjustable Height-adjustable assembly stand with prism mount optionally: rubber wheel mount steel roller attachment for prism workbench pluggable or foldable with vice. Length: mm Width: 700 mm Height: 850 mm Pipe trolley 2.8 to; up to DN pipe trolley for transporting pipes up to DN kg Dimensions length: 630 mm width: 540 mm height: 400 mm

31 Other aids Bosch all-purpose vacuum cleaner Nominal intake: Height: Diameter: Connection: W 15 kg 770 mm 545 mm 230 ~ V Vacuum wet and dry (with accessories)

32 other aids Iversen QR time clock, automatic calendar up to 2022, daylight saving time / wintertime switchover by button Real-time clock based on quartz, automatic correction of all setting values ​​after a power failure. Voltage: 230 ~ V 4.2 kg card box ZM metal card box for 25 cards Dimensions: Height: 810 mm Width: 106 mm Depth: 40 mm Presence card TYPE Stamp cards for attendance time Dimensions: Height: 185 mm Width: 86 mm

33 Drilling drilling rig - upright drilling machine "Flott" E Voltage: Drilling capacity: Tool holder: Drilling depth: Throat depth: Spindle speeds: 400 V / 16 A 36 mm Mk3 160 mm 300 mm / min. 400 kg Other types on request. Drilling rig - mobile precision boring mill Precision boring mill with magnetic stand suitable for overhead drilling Voltage: 230 ~ V Power: W Speed: 250/530 1 / min Tool: Twist drill: up to 16 mm core drill: 18 to 52 mm drilling depth: 50 mm 20 kg magnetic holding force N core drill under drill - Diamond drilling machine DD 100 Hilti Voltage: 230 ~ V Power: 1.7 kw Drilling range: wet in manual operation: 8-42 mm wet in the drill stand: 8-82 mm dry in manual operation: 6.2 kg diamond drill bits under

34 Drilling drilling rig - KB core drilling rig Drilling rig for drilling wall and ceiling penetrations in reinforced concrete and masonry. With drill stand, dowel and vacuum plate. Voltage: Power: Drilling diameter: Drill bits below ~ V 2.2 kw mm Drill - Magnetic drill BDS MB35 / Voltage: 230 ~ V Power: W Drill diameter: up to 36 mm Magnetic holding force: N 12 kg Tool: Twist drill: up to 13 mm Core drill: 12 to 36 mm rotary hammer Bosch BOSCH rotary hammers with quick change tool holder (SDS) Drilling: 12 to 40 mm Opening: 55 to 65 mm Hollow crown: 90 to 100 mm Power: 950 to W 5.9 to 8.0 kg Drill under 7 3

35 Drilling Hilti hammer drill Switchable: percussion drilling and chiseling Drilling: 12 to 37 mm Hole: 40 to 80 mm Hollow crown: 43 to 125 mm Power: 800 to W 7.8 to 9.8 kg Drill less than 7 3 Drill - impact drill Voltage: 230 ~ V, 42 V, DL drive Power: up to watts Nominal speed: up to / min Drill: 16 mm Drill: (impact): 13 mm 2.25 kg Angle drill Bosch angle drill GWB 10 RE Gear head height without drill 74 mm Voltage: 230 ~ V Drilling diameter: 10 mm Power: 400 watts nominal speed: 750 1 / min 1.6 kg angle drill Fein FEIN angle drill ASzx 648 gear head height without drill 60 mm voltage: 230 ~ V drilling diameter: 15 mm power: 460 watts nominal speed: 740 1 / min 3, 6 kg

36 Drilling drilling device - tapping device J 311 Manibs For tapping pressurized lines up to PN10 with flange connection for special fittings with flange outlet. With accessories in the case. Drive: Compressed air drive DN drill bits under 7 3 Drilling device - Tapping device Perfect size For tapping up to 2 "pressurized lines up to 6 bar. Electric or compressed air drive. Status 08/2007

37 Sawing and milling Band saw Vario 230 horizontal Clamping: Workpiece dimensions Profiles / pipes: Cutting speed. 400 V / 16 A max. 250 mm mm / min 620 kg Other types on request. Recirculating pipe saw RBO Drive type: Voltage: electrical 400 V / 16 A Pipe diameter: mm Cutting depth: max. 38 mm Feed: 30 mm / min 106 kg Pipe milling machine RDG 18-3a With compressed air drive, protection for working on water, oil and gas pipes . Pipe diameter: mm Air pressure: 6 bar Air consumption: 2 m³ / min Cutting depth: max. 45 mm Cutting speed: 19.7 m / min Feed: 40 mm / min 110 kg

38 Sawing and Milling Jigsaw Rollers Fox electric Voltage: 230 ~ V Working area: up to DN 100 Material thickness: from 3 mm Dimensions Length: 455 mm Width: 80 mm Height: 90 mm 2.8 kg Jigsaw AStxe 649 electric Can be used for: pipes up to 325 mm Profiles up to max. 290x550 mm Power: 750 W Voltage: 230 ~ V Stroke length: 60 mm 5.9 kg Jigsaw GST 85 PE Pendulum stroke Voltage: 230 ~ V Power consumption: 580 W Stroke height: 26 mm Speed: / min Cutting depth in wood : 85 mm cutting depth in aluminum: 20 mm cutting depth in steel: 10 mm 2.4 kg jigsaw fine mot 6-18 compressed air Can be used for: pipes up to 325 mm profiles up to max.290x550 mm power: W stroke length: 60 mm operating pressure: 6 bar Air consumption: 1450 l / min 7 kg

39 Sawing and milling RA pipe cutter Voltage: Power: 230 ~ VW Pipe: 1/4 "to 2" Wall thickness: up to 5.5 mm 45 kg RA pipe cutter Voltage: 230 ~ V Power: W Pipe: 1/2 "to 4" Wall thickness: up to 7 mm 78 kg pipe cutter RA Voltage: Power: 230 ~ VW pipe: 3 "to 6" Wall thickness: up to 9.5 mm 95 kg

40 Thread cutting Thread cutting machine Roller's Robot 2 (011) Robust, powerful thread cutting machine for pipe threads. Drive machine with impact chuck and centering chuck; Tool tray; Automatic cutting heads; Tube cutter and internal deburrer as well as automatic lubrication cooling. Voltage: 230 ~ V Working range head 1: ¼ "- 2" Working range head 2: 2½ "- 4" Power: W Speed: 53 ¹ / min. 128 kg thread cutting machine Roller's Robot 4 (014) Robust, powerful thread cutting machine for pipe threads. Drive machine with impact chuck and centering chuck; Tool tray; Automatic cutting heads; Tube cutter and internal deburrer as well as automatic lubrication cooling. Voltage: 230 ~ V Working area head 1: ¼ "- ¾" Working area head 2: 1 "- 2" Working area head 3: 2½ "- 4" Power: W Speed: 23 ¹ / min. 130 kg as of 08/2007

41 Thread cutting Thread cutting machine King2 - Central thread cutting machine, complete with accessories in a metal case. Voltage: 230 ~ V Working range: 1/8 "- 2" Power: W 6 kg Threaded clip - Hand "Rollers" - King cutting clip in a carrying case, complete with accessories. Working range: up to 2 "Further thread clips up to 3" on request. Status 08/2007

42 cutting pipe cutter 8 "-12" four-wheel four-wheel pipe cutter for PVC; Cast iron and steel pipes Pipe dimensions: up to 12 "17.7 kg Other dimensions on request. Status 08/2007

43 Grinding and polishing Angle grinder 125 mm various brands "Fein", "Bosch", "Hilti" Voltage: 230 ~ V, 42 V, DL drive Grinding and cutting discs: 125 mm Cup brushes: 60 mm 1.8 kg Grinding a Cutting disks, brushes under point 7 (consumables) Angle grinder mm various makes "BOSCH", "FLEX", "Fein" and others Voltage: 230 ~ V, 42 V, DL drive Grinding and cutting discs: 180 to 230 mm Cup brushes: 100 mm Cup wheels: 110 mm 4.2 to 4.8 kg Straight grinder Bosch straight grinder GGS 27LC Bosch grinding wheel diameter: up to 25 mm Collet diameter: 6 mm speed: / min voltage: 230 ~ V power consumption: 600 W 1.6 kg straight grinder fine straight grinder MSH 648 fine voltage: grinding pin: collets: speed: power consumption: 230 ~ V up to 50 mm up to 8 mm / min 650 W 3.1 kg

44 Grinding and polishing Polishing device - Politex Voltage: power consumption: polishing width: 230 ~ VW 150 mm grinding machine DM32 Metabo voltage tool diameter: tool width: power consumption: speed: weight with stand: 230 ~ V 150 mm 20 mm 280 W / min 36 kg bench grinder 2 x 200 mm Voltage: 230 ~ V / 400 V Tool diameter: 200 mm Tool width: 32 mm Power consumption: W Speed: / min approx. 80 kg

45 Turning Maintenance unit for DL ​​devices Ballast for compressed air tools Operating pressure: max. 10 bar Operating temperature: +10 to +50 C Usable oil tank content: 110 cm³ Sinter filter Pore size: µm Chamfering device MF 3 - compressed air or electrical device is used to process welded edges on individual pipes and membrane walls. Drive, electric or compressed air 6 bar, in connection with DL maintenance unit Clamping range outside: Wall thickness: Power: Air consumption: 20-63.5 mm to 15 mm W 0.96 m³ / min. 9.2 kg chamfering device MF 3i-w - compressed air or electrical device is used to prepare weld seams on pipe ends, nozzles and collectors. Drive, electrical or compressed air 6 bar, in connection with DL maintenance unit Clamping range inside: Wall thickness: Power: Air consumption: 16.9-96 mm to 15 mm 740 W 0.96 m³ / min. 10.3 kg

46 Turning MF 3i chamfering device - compressed air or electrical device is used to prepare weld seams on pipe ends, nozzles and collectors. Drive, electrical or compressed air 6 bar, in connection with DL maintenance unit Clamping range inside: mm Wall thickness: up to 25 mm Power: 740 W 11 kg Chamfering device MF 5i - compressed air device is used to prepare the weld seams of pipe ends, sockets and collectors. Compressed air drive 6-7 bar, in connection with DL maintenance unit, inside clamping range: mm Wall thickness: up to 30 mm Power: W Air consumption: 1.92 m³ / min 23.8 kg MF 6i chamfering device - Compressed air device is used to prepare the weld seams of pipe ends and sockets and collectors. Compressed air drive 6 bar, in connection with DL maintenance unit, clamping range inside: mm (496 mm) Wall thickness: up to 30 mm Power: W Air consumption: 2.6 m³ / min 33 kg

47 Turning Chamfering device MF 6i-50 - Compressed air device is used to prepare weld seams on pipe ends, nozzles and collectors. Compressed air drive 6 bar, in connection with DL maintenance unit, clamping range inside: Wall thickness: Power: Air consumption: mm to 30 mm 2200 W 2.88 m³ / min 81.6 kg Chamfering and pipe cutting device WACHS SF External clamping, divisible device for cutting pipes as well for preparing the weld seams of the pipe ends. Attachable compressed air drive 6 bar, in connection with DL maintenance unit. Clamping range outside: 25.4-102 mm wall thickness: up to 35 mm DL consumption at 6 bar: 2.0 m³ / min. DL drive: Material no: or kg Chamfering and pipe cutting device WACHS SF External clamping, divisible device for cutting pipes and for preparing the weld seams of the pipe ends. Attachable compressed air drive 6 bar, in connection with DL maintenance unit. Outside clamping range: mm Wall thickness: up to 35 mm DL consumption at 6 bar: 2.0 m³ / min. DL drive: Material no: or kg

48 Turning, beveling and pipe cutting device BG External clamping, divisible device for cutting pipes and for preparing the weld seams of the pipe ends. Attachable compressed air drive 6 bar, in connection with DL maintenance unit. Outside clamping range: mm Wall thickness: up to 35 mm DL consumption at 6 bar: 2.0 m³ / min. DL drive: Material no: or kg Chamfering and pipe cutting device BG External clamping, divisible device for cutting pipes and for preparing the weld seams of the pipe ends. Attachable compressed air drive 6 bar, in connection with DL maintenance unit. Outside clamping range: mm Wall thickness: up to 35 mm DL consumption at 6 bar: 2.0 m³ / min. DL drive: Material no: or kg RAD mm chamfering and pipe cutting device External clamping, non-divisible device for cutting pipes and for preparing the weld seams of the pipe ends. Attachable compressed air drive 6 bar, in connection with DL maintenance unit. Outside clamping range: mm Wall thickness: up to 40 mm DL consumption at 6 bar: 2.6 m³ / min. 115 kg

49 Turning, beveling and pipe cutting device RAD mm External clamping device that cannot be divided for cutting pipes and for preparing the weld seams of pipe ends. Attachable compressed air drive 6 bar, in connection with DL maintenance unit. Outside clamping range: mm Wall thickness: up to 40 mm DL consumption at 6 bar: 2.6 m³ / min. 135 kg chamfering and pipe cutting device RAD mm External clamping device that cannot be divided for cutting pipes and for preparing the weld seams of pipe ends. Attachable compressed air drive 6 bar, in connection with DL maintenance unit. Outside clamping range: mm Wall thickness: up to 40 mm DL consumption at 6 bar: 2.6 m³ / min. 140 kg

50 Bending Hydraulic pipe bending machine Foldable version with bending segments and stand. Pipe: 3/8 "to 2" Bending angle: 0-95 Bending radius: mm Pipe bending machine Mingori 2 VO-S This device works with the pulling method Hydraulics: up to 12 t Pipe diameter: DN10 - DN50 Bending angle: 0-95 Bending radius: mm approx. 62 kg Status 08/2007

51 Bending electric pipe bender Pipe bending machine for cold bending, complete with bending segments and stand. Voltage: 230 ~ V Pipe: up to 3 "Robend - Bieger H + W dimensionally accurate cold bending of hard and soft copper pipe, jacketed copper and mild steel pipe, aluminum and brass pipe as well as thin-walled stainless steel pipe. Bending angle: up to 180 pipe: mm pipe bending machine - Rems Curvo Zum Bending of copper pipes, hard and soft steel pipes (wall thickness 1.5mm), inox pipes and plastic-coated pipes Voltage: 230 ~ V Bending angle: up to 180 pipe: mm

52 Tightening torque wrench For controlled tightening of screws. The torque can be adjusted on the key. Accuracy: ± 4% of reading different torque ranges Item no Item no Item no Item no Item no Nm Drive: 3/8 "R 8-56 Nm Drive: 3/8" R Nm Drive: 1/2 "R Nm Drive: 1/2" R Nm Drive: 1/2 "R Nm Drive: 1/2" R Item Nm Drive: 3/4 "R Item Nm Drive: 3/4" U Item Nm Drive: 3/4 "U Item Nm Drive: 3 / 4 "R Article number Nm Drive: 3/4" U Article number Nm Drive: 3/4 "R Article number Nm Drive: 1" RU = switchable R = right-hand drive To achieve a multiplication of the torque, it is possible to use a torque wrench in conjunction with a Use a power wrench (see article no.)

53 Screwing the transmission power wrench For use with a torque wrench Item number KW 2400 Item number KW 3500 Item number KW 4200 Torque: Input Nm Output Nm Torque: Input Nm Output Nm Torque: Input Nm Output Nm

54 Screwing Torque automat Plarad DE The torque automat is an electric, clockwise and counterclockwise rotating high-performance screwdriver with two-speed automatic and torque-dependent automatic shut-off. Voltage: 230 ~ V Torque: Nm 6.6 kg Tool holder: 1 "Torque automat Plarad DE 36 M The torque automat is an electric, clockwise and anticlockwise rotating high-performance screwdriver with two-speed automatic and torque-dependent automatic switch-off. Voltage: 230 ~ V Torque: Nm 10.2 kg Tool holder: 1½ "automatic torque machine Plarad DEM 45TL The automatic torque machine is an electric, clockwise and anti-clockwise high-performance screwdriver with two-speed automatic and torque-dependent automatic shut-off. Voltage: 230 ~ V Torque: Nm 9.3 kg Tool holder: 1½ "

55 Screwing Torque automat Plarad DP 10 A The torque automat with input automatic and air pressure dependent torque adjustment works clockwise and counter clockwise. The torque machine is suitable for use in potentially explosive areas. Drive: Compressed air Operating pressure: 2-6 bar Air consumption at 6 bar: 580 l / min Torque: Nm 6.6 kg Tool holder: 1 "Torque machine Plarad DP 30 A The torque machine with automatic input and air pressure dependent torque setting works clockwise and counterclockwise Torque machine is suitable for use in potentially explosive areas. Drive: Compressed air Operating pressure: 2-6 bar Air consumption at 6 bar: 580 l / min Torque: Nm 9.8 kg Tool holder: 1 "Torque machine Plarad DP 36 M The torque machine with two-speed automatic and air pressure dependent torque setting works clockwise and counterclockwise. The torque machine is suitable for use in potentially explosive areas.Drive: compressed air Operating pressure: 2-6 bar Air consumption at 6 bar: 580 l / min Torque: Nm 8.9 kg Tool holder: 1½ "

56 Screwing Plarad torque machine MSX / C 155TS Performance range: Nm Screwing device for PLARAD pump unit. Drive unit and ratchet head in one unit. Torque is assigned to a pressure to be read or set on the drive unit (pressure relief valve) via a table. Plarad ratchet head RKU universal ratchet head with interchangeable hexagonal bushes, wrench size: mm Torque: up to Nm at 800 bar Plarad pump unit For driving hydraulic screwing devices Voltage: 400 V up to 32 kg Flow rate: up to 1.3l / 800 bar Operating pressure: 800 bar Plarad- Pump unit with oil cooler For driving hydraulic screwing devices Voltage: 400 V up to 37 kg Flow rate: up to 1.2 l / 800 bar Operating pressure: 800 bar

57 Screwing impact wrench - compressed air 271 EU 1 "Drive: Compressed air Free speed: / min. Working torque: Nm Air consumption at 6 bar: approx. 1 m³ / min. Tool holder: 1" approx. 8.5 kg Use compressed air devices only in conjunction with a maintenance unit ! Other types on request. Impact wrench - compressed air 2954-EU 1½ "Drive: Compressed air Free speed: / min. Working torque: Nm Air consumption at 6 bar: approx. 2 m³ / min. Tool holder: 1½" approx. 15 kg Use compressed air devices only in conjunction with a maintenance unit! Other types on request. Status 08/2007

58 Screwing Impact wrench - electrical Bosch voltage: 230 ~ V tightening torque: 800 Nm Tool holder: 1 "for screws: M30 7.3 kg Impact wrench - electric Bosch voltage: 230 ~ V tightening torque: 500 Nm Tool holder: 3/4" for screws : M24 5.7 kg impact wrench - electrical Bosch voltage: 230 ~ V tightening torque: 220 Nm tool holder: 1/2 "for screws: M6 - M18 3.3 kg

59 Welding devices Welding machine - Inverter PI 250 DCHP LK Voltage: Connector: Control range: Open circuit voltage: Dimensions Length: Width: Height: 400 V 16 AA 95 V 20 kg 570 mm 220 mm 360 mm Welding machine - Inverter Pilot 2400H Migatronic voltage: Connector: Control range: Open circuit voltage: Dimensions Length: Width: Height: 400 V 16 AA 85 V 20 kg 220 mm 400 mm 500 mm Welding machine - TIG welding device Kemppi Voltage: Connector: Control range: Open circuit voltage: Dimensions Length: Width: Height: 400 V 16 AA 80 V 16.5 kg 472 mm 152 mm 385 mm

60 welding devices welding machine - TIG- Kemppi 2500 MLS m.mtm voltage: connector: control range: open circuit voltage: dimensions length: width: height: 400 V 16 AA continuously 80 V 22 kg 500 mm 180 mm 390 mm welding machine - WIG- Kemppi 3500 MLS m .mtm voltage: connector: control range: open circuit voltage: dimensions length: width: height: 400 V 16 AA stepless 80 V 23 kg 500 mm 180 mm 390 mm welding machine - inverter PI 250 DCHP WK voltage: 400 V connector: 16 A control range: A Open circuit voltage: 95 V 63 kg Dimensions with trolley Length: 700 mm Width: 630 mm Height: 1050 mm