ACORP WUD-300N DRIVER

To restore the router’s configuration, follow these instructions: You will be asked for the router’s password. To upgrade the router’s firmware, follow these instructions: There are 2 additional ways that you can determine your router’s IP address:. Click Login to start

Uploader: JoJozahn
Date Added: 15 August 2017
File Size: 28.18 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 86796
Price: Free* [*Free Regsitration Required]

Click the Delete All button to delete all entries Click the Next button to go to the next page and Click the Previous button to return the acotp page.

Select your local time zone. Type the domain names your dynamic DNS service provider gave. No; Built-in support for LTE: You wud-300b now ready to follow one of our other guides. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

If you select the radio button Allow the stations not specified by any enabled entries in the list to access for Filtering Rules, caorp wireless station B will still not be able to access the router, however, other wireless stations that are not in the list will be able to access the router.

You can access the Internet via the router immediately after successfully configuring. Click Browse to view the folders and select the downloaded file.

  D LINK DWL-G650 DRIVER

xcorp With your network all connected, your local wired or wireless network can share Internet access, files and fun for multiple PCs through one ISP account. Figure B-3 Configuration tab Click on Properties. After a specified period of inactivity Max Idle Timethe router will disconnect from your Internet connection, and you will not be able to re-establish your connection automatically as soon as you attempt to access the Internet again.

Click Login to start To Add a Domain filtering entry, click the Add New… button. After successfully entering the password, you will be able to access the router’s web-based utility.

The value can’t be changed. You may want to follow our guide called How To Reset your Router.

Сетевое Оборудование

If you did not see your router’s ip address in the list above. Click the Add New button. Connecting the Router 3. This should not be done unless you are sure it is necessary for your ISP.

Acorp WPCI-150N – router specifications. Acorp роутеры

To add a new rule, enter the following data on the Port Triggering screen. Click the Enable All button to make all entries enabled. On the Windows taskbar, click the Start button, point to Settings, and then click To use this option, click the radio button.

  MX6430 SOUND DRIVER

Keep the field open, which means all LAN ports have been put into the wud300n. If you choose “PPPoE”, you will see this page shown in figure Connect on Demand – You can configure the router to disconnect your Internet connection after a specified period of inactivity Max Idle Time.

Wi-Fi access point; Wireless standard: Click the Enable All button to make all entries enabled Click the Disabled Wkd-300n button to make all entries disabled.

If you want your Internet connection to remain active at all times, enter 0 accorp the Max Idle Time field. If you want to delete the entry, click the Delete. Click the Save button when finished.

You can set up virtual servers on this page, shown in figure Click Next to enter the necessary network parameters.

Click the Save button.