Due to the much improved mounting mechanics for the new LGA processors, Intel has done away with the large retention bracket that was needed on the older Socket implementations. The next item that we found was yet another feature that we like to see included with motherboards, that being a large sticker featuring a layout of the board. I still prefer to see this located farther up the PCB for airflow purposes, though with the slim size of the cable this implementation works nicely as well. Individual PCI Express devices can no longer steal bandwidth away from other peripherals. The PXG Pro also requires a high Northbridge voltage to attain high-end overclocking speeds, something that will only add serious heat to your system, and at 65C, lower the lifespan of your system should it be run under stressful situations. Unlike other synthetic benchmarks which rely on additional components within a computer system like the hard drive, PriBench does not rely on any of these exterior devices for the tests. Okay, maybe not quite that much but you get the point.
|Date Added:||27 July 2017|
|File Size:||32.32 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Incidently, don’t connect the 4-pin auxiliary power albztron here, it is still used, and still has its own socket! There is also an IrDA header, as well a as a three-pin power connection for a front system intake fan.
The PXG Pro follows in line with previous Albatron Northbridge coolers, given that they have mostly been passive solutions.
PXG Pro Albatron Motherboard Mainboard Drivers Manuals BIOS
These two boards could battle back and forth for the remaining benchmarks, but I suspect the PXG Pro will come out on top most. The G and ICH6 up close! Individual PCI Express devices can no longer steal bandwidth away from other peripherals.
Finally, we have the Memory benchmark. px915h
Albatron PX915G & PX915P Series Bios R1.33
This motherboard features some of the same strengths and weaknesses found by the PXP Pro, but where have things improved? This heating problem will certainly affect overclocking capabilities no doubt, especially with Albatron pressing the fact that upping the Northbridge voltage can help overclocking.
Because of its shared architecture, it is open to issues where just one peripheral sucks up all the bandwidth, leaving little to none for other system devices. As far as the PCI bus goes, total bandwidth limitations are just one problem.
Around the Socket T, we find that Albatron has put to use the low profile component zones for the core voltage power supply. Albatron offers a solid range of preset speeds for each of the busses. Most new mainboards with HDA codecs are notable for high in comparison with previous generations audio quality, though the quality is affected not only by the codec itself but by the PCB layout and other accompanying factors as well.
The downsides though, fall under overclocking and BIOS tweaks. The Southbridge portion of the motherboard is a little on the cluttered side, though due to the lack of any additive components for the PXG Pro, this area is far cleaner than some of the boards we have dealt with thus far.
Albatron PXG Pro looks one of the fastest models, compared with the fastest and the slowest out of presently tested mainboards of this class. Sandy Bridge Trying out the new method. While Albatron allows for the standard memory timings to be p9x15g adjusted, there are no other tweaking options available that would make the PXG Pro a standout for tweaking options.
The top setting selections are typical of this portion of the BIOS, as they control both boot order and boot priority for pz915g given devices. The majority of the components in albatrron area of the PCB are, as always, located along the rear edge of the motherboard. The main strength of the PXG Pro is its solid performance, and excellent design. Our program is extremely accurate as we have witnessed time fluctuations of approximately.
Mainboard dimensions — x mm full-sized ATX, nine-screw mount, all mainboard edges are firmly fixed.
Albatron PX915G Pro
Beginners Guides Cases and Access. I still prefer to see this located farther up the PCB for airflow purposes, though with the slim size of the cable this implementation works nicely as well. Okay, maybe not quite that much but you get the point. As far as hardware related inclusions go, the PXG Pro came with the bare minimum. This portion of the BIOS will certainly be home to the overclocker and performance enthusiast. This is generally going to be the typical setup found on most of these iX and iP motherboards for some time to come.
Albatron PXG & PXP Series Bios R Driver – TechSpot
For this benchmarking suite, we decided to take a look at the performance results achieved with MemBench to analyze latency times as well as bandwidth. Using our very own in-house benchmark, MBReview PriBench uses a computationally intensive algorithm to compute several hundred millions of prime integers.
Interestingly enough, we find no auxiliary four-pin audio connections, or a front panel audio header located near the CODEC. This sticker can be affixed to the interior of the case, and is easily accessible if needed.
As we slowly upped the voltage though, we were able to attain higher speed settings for the FSB, but at a serious cost.